32-Port DC Smart Switch
digital-loggers.com
12
matrix by entering user names on the left and checking allowed
circuits on the right.
Network Settings
A valid fixed IP address, network mask, and gateway must be
entered in this section.
When changing IPs, you may need to restart your network switch
to validate the new IP on an “auto-configuring” switch port.
Be
sure to record the new IP address.
Use the
Protect
button to lock the network settings.
Once
protected, the network settings cannot be changed except by
pressing the physical reset button near the Ethernet jack.
AutoPing
TM
AutoPing Operation and Settings
AutoPing is an automatic system for rebooting IP equipment
without human intervention. AutoPing will monitor a device. If
it stops responding, AutoPing can cycle power to reboot it. For
example, you might use AutoPing to monitor an external multi-cast
IP to automatically reboot a DSL router or WiFi AP.
To use AutoPing, first add an IP address. Next, link that IP address
to one or more outlets. Timing settings must be considered.
Add IP Address to AutoPing
Use this option to specify the address of an IP device you wish
to monitor. After entering the IP address, the settings page
will refresh and you can select the outlets associated with this
address. Use the checkboxes in the AutoPing section to correlate
the IP address to one or more outlets. If communications to
the target IP is lost, these outlets will be rebooted. Four main
parameters control AutoPing:
