iv
Draft 1 — DLI Proprietary Information 4/15/02
GENERAL SAFETY
GUIDELINES
The following safety precautions are provided to avoid injury and
prevent damage to this product or any products connected to it during
normal operation. Only qualified maintenance personnel should
perform service procedures.
Use Proper Power Cord
To avoid fire hazard, use only the power cord specified for this
instrument.
Avoid Electric Overload
This unit is designed to be powered from 90–132 and 180–260 VAC,
47-63 Hz, 60 watts. To avoid electric shock, fire hazard, or damage to
the instrument, do not apply a higher voltage.
Ground the Instrument
The ASA 312 is grounded through the grounding conductor of the
power cord. To avoid electric shock, the grounding conductor must be
connected to earth ground. Before making connections to the input or
output terminals of the instrument, ensure that the product is properly
grounded.
Do Not Operate in
Hazardous Conditions
To avoid injury or fire hazard, do not operate this instrument in wet,
damp, or other hazardous condition. Do not operate this instrument in
an explosive atmosphere.
Eye Protection
Users should never stare into unterminated connectors or broken
fibers. In addition, fiber cables and interfaces should always be
handled as if they were emitting laser light. Always leave protective
covers on optical connectors to prevent damage and prevent laser
emissions.
CAUTION
Use of controls or adjustments or procedures other than those specified herein may
result in hazardous radiation exposure.
Replacing the Battery
The ASA 312 uses a lithium battery located in the service access area
not accessible to customers. To avoid damaging the unit, do not under
any circumstances attempt to replace the lithium battery. Return the
unit to Digital Lightwave, Inc. for battery replacement.
WARNING
Danger of explosion exists if the battery is replaced incorrectly. Do not, under
any circumstances, attempt to replace the lithium battery.
➤
➤
