background image

24

Geo Knight & Co Inc

52 Perkins St, Brockton MA 02302 USA

(508)588-0186 - Fax (508) 587-5108

[email protected] - www.heatpress.com

 

Geo Knight & Co warrants that the press is free from defects in both material and workmanship 

One Year from the date of invoice to the buyer. If any parts or workmanship are found to be defective in 
manufacture, Geo Knight & Co will repair or replace the defective parts or workmanship.  In addition, Geo 
Knight & Co warrants that the Digital Knight heat control is free from defects in both material & workmanship 
and is covered under no-charge support for (3) years. Geo Knight & Co also warrants that the heating 
element is warranted for the lifetime of the press, provided it is owned by the original purchaser. This lifetime 
warranty on the heating element does not cover temperature sensor failure, damage or disconnection. This 
warranty covers all parts to repair the defects, except when damage results from accident, alteration, misuse 
or abuse, or when the machine has been improperly installed, or modified in any way. If the press becomes 
defective during the limited warranty period of one year for the entire press, three years for the control, or 
the lifetime of the heating element, Geo Knight & Co reserves the right to recall the defective press to the 
factory for repairs if on site component replacement is deemed not possible by Geo Knight & Co. A return 
authorization must be granted by Geo Knight & Co prior to its return.

 

If a press covered by the one year limited warranty must be returned to the factory for repairs, 

Geo Knight & Co shall make every effort to repair buyer’s press. However, Geo Knight & Co reserves the 
exclusive right to determine whether to repair or replace a defective press. If Geo Knight & Co authorizes a 
replacement press, the warranty of the replacement press shall expire on the anniversary date of the original 
machine’s invoice to the buyer.

 

There are no warranties which extend beyond the description on the face hereof. Seller disclaims 

any implied warranty of merchantability and/or any implied warranty of fitness for a particular purpose, and 
buyer agrees that the goods are sold “as is”. Geo Knight & Co does not warrant that the functions of the 
press will meet the buyers requirements or expectations. The entire risk as to use, quality and performance 
of the press lies with the buyer. In no event will Geo Knight & Co be liable for any damages, including loss 
of profits, destruction of goods or any other special, incidental, consequential or indirect damages arising 
from the use of the press or accompanying materials. This limitation will apply even if Geo Knight & Co or 
its authorized agent has been advised of the possibility of such damage.

Limited Warranty

Содержание DK20SP

























Отзывы: