Digital Innovation Life Actus Solo Скачать руководство пользователя страница 41

Страница: 41 / 54

3. Installation

3.1 Dish Setting

Select  the  satellite/antenna  and  LNB  settings  for  service  sear
ch.  The  values  that  are  set  in  this  menu  will  be  available  fo
r  selection  in  other  service searching  menus.

Satellite :

Select the satellite which you want to do a search

for.
- Press the

LEFT/RIGHT ARROW

button to select the satellite.

- If you press the

button, the entire satellite list will be

displayed.

- Select the desired satellite name to search.
- If the desired satellite name is not listed then select User

Defined.

Frequency :

Select the satellite frequency which you want to use for checking the signal.

LNB Power :

Select the LNB power on or off.

LNB Type :

Select the LNB type.

LNB Frequency :

Select the local oscillator (L.O.). frequency that is specified for the LNB used..

- Use the

LEFT/RIGHT ARROW

buttons to select the LNB frequency.

- If the required LNB frequency is not listed, then enter the frequency manually using the

NUMERIC

buttons.

- When you select Universal LNB type, both 9750 and 10600 are supported at the same time. And

then the LNB 22KHz setting is disabled.

LNB 22KHz :

When you use a separate coax 22 KHz tone switch box, make the 22 KHz tone switch

enabled or disabled to select the input you desire of the tone switch.

DiSEqC Switch :

If you use

DiSEqC 1.0

DiSEqC 1.1

switch, select one of the DiSEqC inputs.

Service Search :

Press the

button to move to the Search Menu

3.2 Positioner Setting

Satellite :

Select the satellite which you want to search for the

Service.
- Press the

LEFT/RIGHT ARROW

button to select the satellite.

- If you press the

button, a complete satellite list will be

displayed.

- Select the wanted satellite name.
- If the desired satellite name is not listed then select User

Defined.

Frequency :

Select the satellite frequency you want to use to

check for a signal.

Positioner :

Select the positioner.

None : (No Positioner)

Using DiSEqC 1.2 :
Move :

To move the dish, press

LEFT/RIGHT

button.

Fine Move :

To move the dish in smaller steps, press the

LEFT/RIGHT ARROW

button.

Step :

Set to positioner moving steps as 1, 2, 3, 4

Positioner Command :

To use various positioner

commands, press the

button. Then, available positioner

commands will appear.

Содержание Actus Solo























































Результаты поиска

Содержание Actus Solo

Отзывы:

Бренды по названию

Популярные бренды

Digital Innovation Life Actus Solo, Руководство пользователя

Результаты поиска

Содержание Actus Solo

Отзывы:

Бренды по названию

Популярные бренды