Digital ID View SV+ Скачать руководство пользователя страница 54

Страница: 54 / 108

(3)

Key in sender’s full email address. It must be a valid email address.

(4)

Add Alarm Notice: Click the icon

Add

to see the follow figure.

(5)

Alarm Duration: The duration time can be from 1 minute to 1440 minutes (1 day).

When the “Alarm” happens, the DVR system will send the alarm notice one time

during the duration and do it again in next duration until the “Alarm Source”

disappears.

(6)

Select alarm

Source

. Please refer to the definition of each alarm source.

(7)

Action: Click the icon “

E-Mail”

and key in the email addresses which will receive the

alarm notice. You can enter three email addresses to be notified for a single alarm.

(8)

Click “

” when you have done the setting.

(9)

You can add another alarm notice by repeating the step (4) to (8).

[

Alarm to FTP Site]

(1) Make sure the DVR system connects to Internet.

(2)

Key in the IP address of the FTP site.

(3)

Enable “ Passive mode” if DVR is behind Firewall/NAT and connects to network by

PPPoE.

(4)

Enter the directory you would like to store the alarm notice (logs and pictures).

(5)

Add Alarm Notice: Click the icon

Add

to see the above figure.

Содержание SV+













































































































Результаты поиска

Содержание SV+

Отзывы:

Бренды по названию

Популярные бренды

Digital ID View SV+, Руководство пользователя

Результаты поиска

Содержание SV+

Отзывы:

Бренды по названию

Популярные бренды