Digital ID View Real-time NETWORK VIDEO RECORDER Скачать руководство пользователя

Страница: 7 / 115

Introduction

The compact size standalone 4/8CH Network Video Recorder can operate independently

with local live monitoring, recording, playback and local configuration. It supports up to

H.264 High Profile decoding. The high-efficiency 4/8CH NVR can perform up to 4/8CH

Full HD recording with multiple recording modes, including continuous, manual,

scheduled, alarm and motion recording.

1.1

Features



Local operations and configurations: With local operations and configuration

technology, the complicated network configurations are able to perform locally.



High Resolution local display: It supports live and playback directly from HDMI or

VGA monitors or TV. It supports HDMI interface which is able to connect to HDMI

monitor or TV in full HD (1920x 1080) resolution.



Plug-and-Play installation:

It provides users with automatic installation to reduce the

redundancy in operation and maintenance costs.



Linux-embedded, highly reliable standalone NVR.



Megapixel recording (up to 10Mbps per channel): It supports megapixel recording

(up to 10Mbps per channel) from different IP cameras.



Record up to 4/8 channel Full HD video input.



Video search by date and time, event and channel: It supports convenient video

search by date and time, event and channel on the local playback interface.



Digital watermark: It provides the digital watermark utility to verify whether the

videos are original or not.



Digital zoom for live and playback



Remote monitoring of NVRs by Android phones, iPhone and iPad.



CMS: It provides with free bundle CMS to manage 128 channel cameras. Live

monitoring with maximum 32 channels simultaneously and one device playback.



Support 3 internal SATA HDDs, up to 9TB.



Convenient Control of PT cameras: It supports PT (Pan/Tilt) cameras to adjust

directly from the NVR and they can be viewed on the local display.

Содержание Real-time NETWORK VIDEO RECORDER




















































































































Результаты поиска

Содержание Real-time NETWORK VIDEO RECORDER

Отзывы:

Похожие инструкции для Real-time NETWORK VIDEO RECORDER

Бренды по названию

Популярные бренды

Digital ID View Real-time NETWORK VIDEO RECORDER, Руководство пользователя

Результаты поиска

Содержание Real-time NETWORK VIDEO RECORDER

Отзывы:

Похожие инструкции для Real-time NETWORK VIDEO RECORDER

Бренды по названию

Популярные бренды