53
6.4
System Settings
6.4.1
Device Setting
In the System-Device menu, user can configure the device related settings.
Device Name – Input the name for the NVR.
Device No. – Input the number for the NVR.
Language – Select from the list for the language to be displayed on the local NVR.
IR Remote Controller – Set the IR remote control ID for remote control use. Each
IR remote controller can control up to 9 NVRs. For example, if user set NVR IR
remote controller as ID#1, user can press “ID” and “1” on the IR remote controller
to control ID#1 NVR.
Enable Authentication – Select On to active the user login. If user select Off, no
user name or password is required to access the system.
Auto Scan & Add IP-Cameras –Select On to active auto scan & add IP cameras.
The NVR will continually scan the IP camera and check whether there is a new IP
camera in the LAN environment. When the NVR detect a new IP camera in the
LAN environment, NVR will automatically add the IP camera into NVR when
there is still spare channel existing in the NVR.
Install Wizard – Click “Go” to bring up Install Wizard menu.
Click “Apply” to save the settings.
