3.5 Plug the external cables according to the use requirements
of equipment.
Picture 3 Equipment installation diagram (2)
3.6 Using tools to adjust screw loose device;
3.7 The up and down or so regulating equipment, according to
the use requirements set equipment of direction;
3.8 Using tools to screw locking device;
4.Network Operation
4.1 Use correct power supply
4.2 After startup, connect the device with switch or router,
see below picture
Picture 4 Network structure
4. 3 Default IP setting:
IP address: 192.168.1.10
Subnet Mask: 255.255.255.0
Gateway: 192.168.1.1
User name: admin
Password: no password
4.4 Open IE, type IP address, login with user name and
password, see below picture.
Picture 5
WEB GUI After login, enter into below picture
Picture 6 WEB GUI after login
Equipment specific relevant parameter Settings please
refer to IP camera user manual in the CD “IP CAM User
Manual V2.0.2.doc”.
5. SPECIFICATIONS
Model
IR-DEF363MP
Camera
Image Sensor
1/3” 3 Megapixel Aptina CMOS
Effective Pixels
2048 (H) x1536(V)
Scanning System
Progressive
Electronic Shutter
Speed
Auto/Manual 1/50~1/10000
Min. Illumination
Color: 0. 1 lux /F1.4, B/W: 0.01 lux /F1.4,0 lux (IR on)
S/N Ratio
>50dB
Camera Features
Max. IR LEDs
Length
60 ft
Day/Night
Auto(ICR) / Color / B/W
Backlight
BLC
White Balance
Auto
Gain Control
Auto/Manual
Noise Reduction
3D
Privacy Masking
Up to 4 areas
Slow Shutter
None / Low / Middle / High
Motion Detection
22 x 18 areas
Lens
Focal Length
3.6mm
Max Aperture
F1.2
Mount Type
Board-in Type
Video
Compression
H.264 High Profile / JPEG Snapshot
Resolution
60Hz Mode: 3M (2048 x 1536) / 1080P(1920*1080)
/ 720P(1280×720)
Frame
Rate
Main Stream
3M (1~15fps) / 1080P / 720P (1 ~ 25 / 30fps)
Sub Stream
D1 / CIF (1 ~ 25 / 30fps)
Bit Rate
H.264: 50 K ~ 8000 Kbps
Network
Ethernet
RJ-45 (10/100Base-T)
Protocol
IPv4, HTTP, SSL, TCP/IP, UDP, UPnP, ICMP, IGMP,
SNMP, RTSP, RTP, SMTP, NTP, DHCP, DNS, PPPOE,
DDNS, FTP, IP Filter, QoS, Cloud
ONVIF
ONVIF Ver. 2.0
Max. User Access
5 users
Smart Phones
iPhone,, Android
Browsers
IE
General
Power Supply
DC12V, PoE (802.3af)
Power Consumption
<6W
Working
Environment
Temperature: 14°F~ 122°F, Humidity: 10%~90%
Ingress Protection
IP66
Dimensions
Ø
4.75” x 3.5” (H)
Weight
0.85 lbs
The Specifications are subject to change without prior notice.