5
Using the TLZ09 Cassette Tape Drive
5.1 General
This chapter shows you how to use the TLZ09 drives, buttons, and indicators
(Figures 1–1 through 1–3). It also shows you how to use cassette tapes.
5.2 Power Switch
For a tabletop unit, press the power switch to turn the TLZ09 drive on or off.
If you are not using the TLZ09 drive for prolonged periods of time, check with
your system manager for the correct procedure to shut down your system or
power off the drive.
5.3 Unload Button
Press and hold the unload button for 1 to 2 seconds to eject the cassette tape.
CAUTION
Pressing the unload button during normal tape operations may halt the
tape operation in progress.
5.4 Tape Drive LEDs
The Busy, Tape, and Status LEDs provide information on a variety of
operational conditions on the drive. Table 5–1 describes these indicators. The
LED color is amber for all three LEDs. See Figure 1–1 or Figure 1–2 for LED
locations on the bezel.
Using the TLZ09 Cassette Tape Drive 5–1
