3.4 Connecting a SCSI Signal Cable — Drive to System
If you are connecting a TLZ09 drive directly to your system, you
should use a SCSI signal cable supplied as part of your system
installation kit.
If you do not have this cable, contact your Digital sales representative. You
should use a cable supplied by Digital. Failure to do so can result in degraded
performance of your TLZ09 drive.
To connect a SCSI cable — drive to system — perform the following:
1.
Connect one end of the cable to the system SCSI connector.
2.
Connect the other end of the SCSI signal cable to the SCSI connector on
the rear of the TLZ09 drive (Figure 1–2 and Figure 1–3).
3.5 Connecting the Power Cable and Mounting
Connect the system internal power cable located at the rear of the drive
(Figure 1–2 and Figure 1–3).
NOTE
Multivendor Customer Services personnel: The power cable disconnects
the drive from dc power generated by the main ac power source.
3–6 Installing the TLZ09-AA/AB, -BA/BB Cassette Tape Drive
