Digital Equipment RapidPrint 500, Справочное руководство

Страница: 45 / 192

Server Configuration Creating Services
4 - 5
Multiple commands can be entered on a single line, subject to the server’s command line length
limit of 132 characters. The following commands have the same effect as those in the previous
example.
Figure 4-9: Setting Multiple Parameters on One Command Line
You can also configure a backup host in case the primary gateway fails.
Figure 4-10: Configuring Backup Hosts
4.5.3 Host Limit
The Set/Define Server Host Limit command is used to set the number of remote TCP/IP hosts the
server will store information for. This can be set in large network environments to keep RapidPrint
500 network overhead down. An example of the command is shown in the following figure:
Figure 4-11: Setting a Host Limit
4.6 Creating Services
A service is any resource that can be accessed locally or via the network. For example, a host is a
service to which terminals can connect. The RapidPrint 500 can offer its attached printer to the net-
work as services.
When you try to modify a service that already exists, the command will simply change its charac-
teristics. If the service does not exist yet, the server assumes you want to create that service. The
RapidPrint 500 will only print an error message if you try to remove a service that does not exist.
Note also that connections and queueing are enabled by default whenever you create a service.
NOTE: The RapidPrint has no method of connecting to a local service; services must be
tested from another LAT, TCP, NetWare, or AppleTalk node.
The RapidPrint 500 contains three unique default printing services: one for text
(MPS_xxxxxx_TEXT), one for PostScript (MPS_xxxxxx_PS), and one for Binary/PCL
(MPS_xxxxxx_PCL). For more information on default RapidPrint 500 services, see the Services
chapter of your RapidPrint 500 Configuration Guide.
Local> DEFINE SERVER IPADDRESS 192.0.1.228 LOADHOST 192.0.1.33 GATEWAY 192.0.1.188
Local> DEFINE SERVER SECONDARY GATEWAY 192.0.1.195
Local> DEFINE SERVER HOST LIMIT NONE