Digital Equipment Pro-face PS-3450A Series, Справочное руководство, Страница: 94 / 103

Chapter 4 Troubleshooting
4-9
(7) The [Question] dialog box will appear. Press the [Yes] button. It will be reconfirmed that the data of the
hard disk is all reset to the original values at the time of delivery.
“Proceed with disk restore? Destination drive will be permanently overwritten.”
(8) The hard disk recovery program will start. After the recovery operation finishes, the Symantec Ghost™
also will finish. When the message “Please turn off computer” displayed, turn off the power of PS-A.
(9) Turn on the power of PS-A again and immediately press the [F2] key to enter the BIOS setup screen.
(10) Press the [F9] key and select [Yes] for [Load default configuration now?] to set the BIOS setting to the
factory setting. Press the [F10] key to save the setting and restart the PS-A unit.
(11) After the unit restarts, set up your OS.
SEE 1.3.1 Setting Up OS (page1-6)
• If the hard disk unit breaks down due to a hardware problem, (Ex. if BIOS cannot find
the hard disk, if the hard disk’s lifetime expires, or it breaks down), Symantec Ghost™
cannot recover the hard disk. Pro-face recommends that in this case you contact your
local PS-A distributor for instructions about hard disk recovery or replacement.
• Pro-face does not guarantee the preservation of any data stored on the HDD unit if
the HDD unit has an accident, malfunctions or is damaged in any way. Therefore,
the regular backing up of important HDD unit data to either floppy disks, or other
type of suitable magnetic media is strongly recommended.