1.3.2 Diagnostic Tests and Utilities
The diagnostic tests and utilities are similar to the power-up tests except that
the power-up tests enable you to test all the devices in the system, whereas the
diagnostic tests and utilities enable you to test single devices and the functions of
single devices.
Figure 1–1 shows a list of diagnostic tests obtained by entering the following
command:
>>> T 9E
Figure 1–1 Diagnostic Tests
Test
#
Address
Name
Parameters
___________________________________________________________________________
20052200
SCB
20055850
De_executive
30
2006A53C
Memory_Init_Bitmap *** mark_Hard_SBEs ******
31
2006AB34
Memory_Setup_CSRs
*********
32
2005D148
NMC_registers
**********
33
2005D324
NMC_powerup
**
34
2005E6D8
SSC_ROM
***
35
2005FB90
B_Cache_diag_mode
bypass_test_mask *********
37
20061590
Cache_w_Memory
bypass_test_mask *********
40
2006B5E0
Memory_count_pages SIMM_set0 SIMM_set1 Soft_errs_allowed *****
41
20068CEC
Board_Reset
*
42
20061880
Chk_for_Interrupts **********
46
200610C4
P_Cache_diag_mode
bypass_test_mask *********
47
2006AD04
Memory_Refresh
start_a end incr cont_on_err time_seconds *****
48
2006B028
Memory_Addr_shorts start_add end_add * cont_on_err pat2 pat3 ****
4A
2006A23C
Memory_ECC_SBEs
start_add end_add add_incr cont_on_err ******
4B
2006940C
Memory_Byte_Errors start_add end_add add_incr cont_on_err ******
4C
20069BA0
Memory_ECC_Logic
start_add end_add add_incr cont_on_err ******
4D
20068FE8
Memory_Address
start_add end_add add_incr cont_on_err ******
4E
20069188
Memory_Byte
start_add end_add add_incr cont_on_err ******
4F
2006B7F4
Memory_Data
start_add end_add add_incr cont_on_err ******
51
2005803C
FPA
**********
52
20058530
SSC_Prog_timers
which_timer wait_time_us ***
53
20058818
SSC_TOY_Clock
repeat_test_250ms_ea Tolerance ***
54
20057C18
Virtual_Mode
********
55
20058E6C
Interval_Timer
*****
56
2006507C
SHAC_LPBCK
From_bus To_bus passes *******
58
20065D24
SHAC_RESET
dssi_bus port_number time_secs not_pres *
59
20062778
SGEC_LPBCK_ASSIST
time_secs **
(continued on next page)
Troubleshooting and Diagnosing Problems 1–13