Table 4–7:
Forms Adjustment Procedure
Action
Results
Display
Press (3) ON LINE
Printer goes off-line.
[ O F L]
Press (9) FCT
Printer enters Mode Selection mode.
[.F n c]
Press (4) LINE
FEED
Printer enters Forms Adjustment mode.
[.F A d]
At this point, the choices are:
(0) TEST CLR
Exits from Forms Adjustment to OFF
LINE and feeds to top of next form in
accordance with current length.
[ O F L]
(1) PRG
Prints rotating test pattern (see NOTE).
[.F A d]
(4) LINE FEED
Advances paper 0.23 cm (1/72 inch).
[.F A d]
(6) PAPER REV
Moves paper 0.23 cm (1/72 inch) in
reverse direction.
[.F A d]
NOTE
The pattern begins and continues when key (1) PRG is pressed
and held. The pattern stops when the key (1) PRG is released.
The Forms Adjustment mode is still active after printing the
test pattern.
SETTING COMMUNICATIONS AND PRINT PARAMETERS
4–37
