11
12
2
DEC Field Service Instruction
5112 991 10723
7-26
7-27
Part:
Print H-Encoder
Part No.: 5112 292 4310x
DEC P/N.:
FD-W0290-01
REMOVAL
"
Disconnect mains cable
"
Remove all encasing parts (see Part:
Housing
)
"
Remove encoder strip (1) (see Part:
Encoder Strip
)
Y
M
Remove the noise reduction foam (2)
Y
M
Remove at the left and right side the upper screws (5)
Y
M
Loosen at the left and right side the screws (6) and remove the
mounting plate (7)
Y
M
Move the carriage to the cutout (8)
Y
M
Remove the two screws (9) from the carriage
Y
M
Remove the screw (10) and the cable clamp from the carriage
Y
M
Disconnect the print head cable from the head
Y
M
Clip the plastic support (11) from the carriage and disconnect the
wire-to-wire connector (12) H-Encoder/print head cable
Y
M
Remove the print head H-encoder
REASSEMBLING
"
Execute the REMOVAL procedure in reverse sequence
Note:
Pay attention that the logic cable is fixed correctly by clamp
(10)
