Digital Equipment FR-856E*-WB Скачать руководство пользователя страница 20 | Manualshive

Страница: 20 / 74

Digital Equipment FR-856E*-WB Скачать руководство пользователя страница 20

Digital VENTURIS Pentium PC

Utilities & Configuration

MCS Logistics Engineering - Nijmegen

23

Boot Options

(continued)

Menu Fields

Settings

Comments

Summary
screen

Enabled
Disabled

Enabling this option causes the computer to display configuration
parameters (in the form of a summary screen) during boot.

Fixed Disk Setup OptionsIDE Adapter 0/1 Master/Slave

Menu Fields

Settings

Comments

Autotype fixed
disk

Press [Enter] to detect and fill in the installed hard disk drive
parameters in the remaining fields.

Type

(1)

None to 39
User

Selecting None to 39 automatically fills in the remaining fields in this
menu. Selecting User prompts to fill in the remaining fields with the
installed hard disk drive’s parameters.

(2)

Cylinders

(1)

0 to 4095

Displays the number of cylinders.

Heads

(1)

1 to 64

Displays the number of heads.

Sectors/track

(1)

0 to 63

Displays the number of sectors/tracks.

Landing zone

0 to 4095

Displays the resting or park position of the heads when the HDD is
inactive.

Write
precomp

(1)

0 to 4095
None

Displays the number of cylinders that have their write timing changed.

Multi-sector
transfers

2 sectors
4 sectors
8 sectors
16 sectors
Auto
Disabled

Determines the number of sectors per block for multiple sector
transfers.

Auto refers to the size the disk returns when queried.

LBA control
mode

Disabled
Enabled

Enabling LBA causes logical block addressing to be used instead of
cylinders, heads and sectors.
This option allows to select Disabled for IDE hard disk drives up to
528 MB. When using IDE drives greater than 528 MB and MS-DOS
or MS-Windows as the operating system, select Enabled. Select
Disabled for all other operating systems.

32 bit I/O

Enabled
Disabled

Enables or disables 32-Bit data transfer with the IDE HDD. If
enabled, Read Ahead Mode is enabled and cannot be changed by the
user.
This is recommended when using the PCI IDE connector.

Transfer
mode

Standard
Fast PIO1
Fast PIO2
Fast PIO3

Selects the method to transfer data to and from the HDD. When
selecting the user autotype for the HDD, Setup automatically selects
the optimum transfer mode is selected.

Read ahead
mode

Enabled
Disabled

When enabled, the read ahead buffer in the local bus IDE controller
increases HDD performance. Enabled is selected automatically if 32-
Bit I/O is enabled.

(1)

These fields are automatically filled in if the computer auto-detected an installed hard disk drive.

(2)

Incorrect settings can cause the computer to malfunction.

«
...
18
19
20
21
22
...
»

Содержание FR-856E*-WB











































































Отзывы:

Нет отзывов