6
DSP2022-A ATA/IDE Disk Drive Installation Guide
Learn the Jumper Functions
The jumper functions on the ATA drive are described in
Table 3. Note that jumper 0 is used for selecting single or
dual drive operation and that jumper 7 is used to prevent
the drive from entering manufacturing test mode if pin A1 is
momentarily grounded. Jumpers 1 through 6 are reserved
for future use and should always be left in place.
Table 3
Jumper Descriptions
Jumper Function
Jumper Status
0
Single drive operation
IN
Master drive in dual
operation
IN
Slave drive in dual operation
OUT
1
Reserved
IN
2
Reserved
IN
3
Reserved
IN
4
Reserved
IN
5
Reserved
IN
6
Reserved
IN
7
Prevents the manufacturing
test from being initiated if
ATA connector pin A1 is
grounded
OUT
