Digital Equipment DECstation 212LP, Руководство по обслуживанию

Страница: 43 / 91

2–22 Troubleshooting
• Expansion memory size (displayed on the screen at power-up).
• Primary video adapter type (VGA).
• CPU and BUS clock speeds.
CPU speed is the CPU processing speed, and BUS speed is the
I/O expansion bus transmission speed.
The Setup utility is run as follows:
1. Turn power to the monitor on.
2. Insert the Utilities diskette in the drive and turn power to the
system on.
3. The power-up tests run, then the monitor displays a language
selection menu. Select a language, then press
Enter
.
4. The monitor displays an option menu. Select option 4
(SETUP), then press
Enter
.
5. The monitor displays the Setup utility menu. Follow the
instructions on the bottom of the screen and select the correct
system configuration, then press
F2
to save and exit the menu.
NOTE
Use the keyboard arrow keys to select a configuration
in the Setup utility menu; do not use the keypad arrow
keys.
6. Reboot the system using one of the following methods.
• Press the
Ctrl Alt Del
keys simultaneously (preferred
method).
• Press the Reset button on the front of the system unit.
When the system displays the copyright page the setup
procedure is complete.
NOTE
If the hard disk is not formatted, a hard disk failure
message might display on the copyright screen.