Digital Equipment DECserver 90M, Руководство пользователя

Страница: 29 / 48

Installation 2–11
Table 2–1: LOAD and DUMP Protocols
Port LED Meaning
4 Booting from Flash RAM
5 Waiting to retry
6 Ethernet BOOTP or dump
7 ISO 8802/3 MOP load or dump
8 MOP load or dump
For more information about installing the software, refer to the appropriate DEC-
server Network Access Software Installation documentation.
2.3.3 Using Console Commands to Boot
If you program Flash RAM with a nonstandard boot image name and a load host is
not available, pressing the reset-to-factory button may leave the DECserver unboot-
able. A nonstandard boot image name is any name other than MNENG2. To allow
booting of a nonstandard boot image name, perform the following steps:
1. During the boot sequence of the DECserver 90M initialization process, press
Ctrl/B two times consecutively.
Ctrl/B Ctrl/B
The boot process stops and the DECserver returns the following console prompt:
>>>
2. At the
>>>
prompt, you can enter
H
to invoke help.
Entering
H
provides minimal help text to describe the interactive boot mode
commands available. Table 2–2 lists the boot mode commands and summa-
rizes the help text that displays when you invoke
H
.