Digital DECpc LPv/LPv+
Utilities & Configuration
MCS Logistics Engineering - Nijmegen
19
Copying KP.EXE onto Hard Disk
1) Turn on the computer and allow POST to complete without error.
2) Insert the backup copy of the System Utilities diskette into drive A.
3) At the MS-DOS prompt type
a:
then press
[Enter]
to access drive A.
4) At the
A:\>
prompt type
copy kp.exe c:
then press
[Enter]
.
KP.EXE is then copied onto drive C of the computer's hard disk.
5) Remove the backup copy of the System Utilities diskette.
Setting a Keyboard and Mouse Password
After copying KP.EXE onto the computer's hard disk, a keyboard and mouse password can be set using the
following procedure:
1) At the MS-DOS prompt type
kp
then press
[Enter]
. You are then prompted to enter a password.
NOTE
Other applications, such as QEMM386 V6.01, use the character string kp to invoke or
enable commands. When having such an application installed, add the /nic parameter
when to set a keyboard and mouse password using the Keyboard Password utility.
2) Enter a password then press
[Enter]
. You are then prompted to type the password again to verify it.
3) Enter the password then press
[Enter]
. The keyboard has been locked.
4) To unlock the keyboard, enter the password and press
[Enter]
.
Diskette 2: S3 86C805 Windows 3.x Drivers
This diskette contains the following files:
♦
Windows 3.x application drivers
Provides S3 86C805 video drivers.
♦
README.WIN
Contains information on how to load S3 86C805 drivers into
Windows 3.x.
Depending on how the computer is setup and what software applications are to be used, it might be
necessary to install one or more of these drivers to optimize the capabilities of the computer.
NOTE
Before installing a video device driver, refer to the information in the associated
README file contained on this diskette and the System and S3 86C805 VGA Utilities
and DOS Video Drivers diskette.
To install a Windows 3.x video driver, perform the following:
1) Type
CD WINDOWS
at the C:\> prompt, then press
[Enter]
.
The following prompt appears: C:\WINDOWS>.
2) Type
SETUP
and press
[Enter]
.
The computer displays the SETUP screen.
3) Select the Display option and press
[Enter]
.
