To connect an adjacent MAU or
repeater . . .
a.
Set the Ring In and the Ring Out
Autowrap switches to 1 or 0. Refer
to page 3 for information on the
Autowrap switch settings.
b. Connect the repeater’s Ring Out
port to the Ring In port of the
adjacent MAU or repeater.
c.
Connect the repeater’s Ring In port
to the Ring Out port of the adjacent
MAU or repeater.
d. Once the ring becomes active, verify
that the Ring In and Ring Out LEDs
are on.
Connect a MAU, repeater, or station.
Installing a DEChub ONE Repeater 900TL (continued)
8
DECrepeater 900TL
To use as a lobe extender . . .
a.
Set the Ring In and the Ring Out
Autowrap switches to 1 to enable
Autowrap.
b. Connect the station to the Ring Out
port.
c.
Connect the Ring In port to a station
port on a MAU.
d. Once the station becomes active,
verify that the Ring Out LED is on.
LKG-8154-93I
