Mount repeater (optional).
a.
Connect the power supply cable to
the power connector.
b. Plug the power supply into a wall
outlet.
c.
With power on, verify that the Power
and Module OK LEDs are on.
Set Speed switch.
You can place the repeater on a table, mount it on a wall, or install it in a standard 19-inch rack
using a shelf assembly, Digital part number H9544-MS.
For a wall mounting, position two screws 19.7 centimeters (7.75 inches) apart on the wall. Turn
the screws until tight, and then back off two turns. Hang the repeater using the keyholes.
Installing a DEChub ONE Repeater 900TL
PK–02584–IL
DECrepeater 900TL
7
Connect power supply.
Set the Speed switch to 16 when the
network speed is 16 Mb/s or 4 when the
speed is 4 Mb/s.
LKG–8285-93I
LKG–8153-93I
To
Power
Supply
