Digital Equipment DEC FDDIcontroller/EISA, Руководство по установке, Страница: 37 / 90

2–8 DEC FDDIcontroller/EISA Installation
Appendix A contains more information regarding memory-
address and interrupt-request selections.
NOTE
For the DEFEA-DA (DAS model), the EISA configura-
tion settings pertain to the parent card only. Do not add
the daughter card settings to the EISA configuration sys-
tem file.
11. Save the new configuration data, then exit the utility.
For some configuration utilities, you must examine system
and new hardware option switch settings before you save the
configuration data and exit the utility. The controller has no
switches or jumpers. Follow your EISA configuration utility
instructions before you exit the utility.
12. When the configuration utility indicates it is safe to do so,
turn off the power to your computer system and install the
controller (refer to Section 2.5).
2.5 Installing the Controller
This section explains how to install a SAS or DAS controller into an
EISA-based computer.
CAUTION
!
Static electricity can damage modules and electronic
components. Digital recommends using a grounded anti-
static wrist strap and a grounded work surface when han-
dling any modules.
To install the controller, complete the following steps:
1. Remove any diskette(s) from the computer’s disk drive(s).
2. Turn off the power to your computer.