Digital Equipment ChannelWorks DECTV-AA, Руководство по установке, Страница: 63 / 106

Configuring And Installing The ChannelWorks Bridge 4-17
Loading All Parameter Groups
To load all parameters, perform the following procedure:
1. From LCM’s Main Menu click the left mouse button on the Bridge menu selec-
tion.
2. Click on the Load Parameters selection. LCM displays the Bridge Load window.
Figure 4-12 shows an example.
3. Click on the Load All Groups box.
4. Click on OK. LCM loads the ChannelWorks Bridge NVRAM with all group
parameters.
5. Close LCM’s Main Menu and continue setting up the ChannelWorks Bridge for
operation.
Starting The ChannelWorks Bridge
Refer to ChannelWorks Network Installer’s Guide, Chapter 4, “Starting the
ChannelWorks Bridge,” for procedures to:
• Attach the ChannelWorks Bridge to your cable TV network
• Attach the ChannelWorks Bridge to your Ethernet network
• Power up the ChannelWorks Bridge
• Verify the ChannelWorks Bridge is operational