Digital Equipment ChannelWorks DECTV-AA, Руководство по установке, Страница: 12 / 106

xii ChannelWorks Cable TV Installer’s Guide
Document Organization
The ChannelWorks Cable TV Installation Guide is organized as follows:
• Chapter 1, “Introduction,” provides a physical description of the ChannelWorks
Bridge, its input/output connections, and specifications along with the location and
descriptions of the unit’s diagnostic and status LEDs. Chapter 1 also provides a
list of required tools and materials.
• Chapter 2, “Cable TV Network Overview,” describes the ChannelWorks Bridge in
a typical Metropolitan Area Network and contains brief descriptions of various
cable TV network architectures and elements.
• Chapter 3, “Preparing the Cable TV Network,” includes set up procedures for the
TransMaster, frequency agile headend translator. This chapter also explains how
to verify and set the proper network operating signal levels.
• Chapter 4, “Bringing Up the ChannelWorks Bridge,” explains how to configure
the ChannelWorks Bridge using the PC based Management Utility. This chapter
also explains how to turn the power on and verify the ChannelWorks Bridge is
operational.
• Appendix A, “TransMaster Frequency Switch Settings,” includes all input and out-
put switch settings for the TransMaster from 10 to 550 Mhz in 250-KHz incre-
ments in tabular format.