manualshive.com logo in svg

Digital Equipment Celebris FX, Руководство по техническому обслуживанию, Страница: 83 / 219

Поделиться
Скачать
Digital Equipment Celebris FX Скачать руководство пользователя страница 83

Troubleshooting

4-16

Problem

Possible Cause

Action

Computer does not
recognize an internal or
external SCSI device.

Hard disk boot sector is
missing.

Repartition and reformat the hard
disk drive.

Caution:  This procedure erases
what is currently on the hard disk
drive.

You might want to try repairing the
hard disk drive using a disk drive
repair utility.  Disk drive repair
utilities can be purchased from the
local software supplier.

If you do repartition and reformat
the hard disk drive, proceed as
follows for DOS-based operating
systems such as Windows 95.

Boot from a DOS diskette then
enter the following commands:

c:
cd\dos
fdisk

Follow the instructions on the
monitor screen to create a new
hard disk boot sector.

There might be a boot
sector virus.

Run anti-virus software.

Loose cable connectors.

Secure all cable connections.

SCSI adapter has failed.

Replace the SCSI adapter.

SCSI ribbon cable has
failed.

Replace the ribbon cable.

SCSI device has failed.

Replace the SCSI device.

continued

Содержание Celebris FX




























































































































































































































Отзывы:

Нет отзывов