-6-
Do not use
these pins
<Figure 1 ‑ PL‑HD110 Connector>
<Figure 1 ‑ PL‑HD110 Connector>
<Figure 1 ‑ PL‑HD110 Connector>
<Figure 1 ‑ PL‑HD110 Connector>
<Figure 1 ‑ PL‑HD110 Connector>
Cable Inversion Prevention
Pin (Removed)
Connect
the cable
here
Caution
If the hard disk unit’s connector is attached incorrectly, there is a possibility
of damage to the unit. Please follow the instructions given here carefully.
X
X
Be sure the hard disk unit cable’s connector is not skewed from its correct
attachment position due to attaching the new PL-HD110. A loose connection
can cause damage to the unit.
!!!!!
4) Disconnect the old PL-HD110
unit from the HDD connection
cable.
• Be sure not to bend any
of the HDD’s connector
pins while removing the
cable’s connector.
5) Reattach the connection cable
to the new PL-HD110’s connec-
tor.
Old PL-HD110
HD Connection
Cable
Connect to the
PL-HD110
(see note
below)
New PL-HD110
Be careful not to
move the main
board's connector
