Digital Electronics Corporation Pro-face Flex Network FN-X16TS11 Скачать руководство пользователя

Страница: 2 / 60

Flex Network User Manual

Preface

Thank you for purchasing Pro-face's Flex Network units, hereafter referred to as
the "Unit".

The Unit is designed to be used with Pro-face's Graphic Logic Controller or Pro-
face's LogiTouch Series units (hereafter referred to collectively as the "GLC") for
distributed I/O connection.

This manual explains the overall features and specifications of the Unit, as well as
its installation procedures.

Please be sure to read this manual thoroughly to understand the correct and safe
usage of this product and its features.

<Note>

1) It is forbidden to copy the contents of this manual, in whole or in part, except

for the user's personal use, without the express permission of Digital Electron-
ics Corporation of Japan.

2) The information provided in this manual is subject to change without notice.

3) This manual has been written with care and attention to detail; however, should

you find any errors or omissions, please contact Digital Electronics Corporation
and inform us of your findings.

4) Please be aware that Digital shall not be held liable by the user for any dam-

ages, losses, or third party claims arising from the uses of this product.

All Company/Manufacturer names used in this manual are the registered trade-
marks of those companies.

Flex Network

is a registered trademark of Digital Electronics Corporation in

Japan and other countries.

Содержание Pro-face Flex Network FN-X16TS11





























































Результаты поиска

Содержание Pro-face Flex Network FN-X16TS11

Отзывы:

Похожие инструкции для Pro-face Flex Network FN-X16TS11

Бренды по названию

Популярные бренды

Digital Electronics Corporation Pro-face Flex Network FN-X16TS11, Руководство пользователя

Результаты поиска

Содержание Pro-face Flex Network FN-X16TS11

Отзывы:

Похожие инструкции для Pro-face Flex Network FN-X16TS11

Бренды по названию

Популярные бренды