manualshive.com logo in svg

DIGITAL DELAY 1014-SCR, Инструкция по эксплуатации

Поделиться
Скачать
DIGITAL DELAY 1014-SCR Скачать руководство пользователя страница 8

 

8 

Setting Dial-In Times

 

 

 

 

 

To set a new Dial-In time into either Your Time or Their Time press the C key until the Dial-In 

times are being displayed.  To enter a new number press the corresponding letter key (A or B) to the 
display containing the Dial-In time to be changed.  The selected display will go blank indicating the unit 
is ready to accept the new Dial-In time.  Enter the new Dial-In time using the numerical keys, leading 
zeros do not have to be entered.  For example if 9.90 for a Dial-In time is desired 990 would be entered on 
the key pad.  As the numbers are entered they are shown on the display, indicating the numbers are 
accepted and entered into memory.  If a mistake is made while entering the number, depressing the 
corresponding letter key (A or B) for the display again will erase the last digit entered.  This can be 
repeated as many times as necessary until the display is blank.   

 

 

Setting Delay Times

  

         

 

 

 

To set a new delay time into either Delay 1 or 2 press the C key until the delay times are 

displayed.  Then follow the same procedure for entering a new number as instructed in setting new Dial-
In times. 

 

 

Setting Stage Times

  

 

 

 

To set a new stage time into any of the stages press the E key until the stage time to be changed is 

displayed.  Then follow the same procedure for entering a new number as instructed in setting new Dial-
In times.

 

 

 

 

Setting Throttle Mode

  

 

 

 

To set the Throttle Mode press the D key until the Throttle Mode is shown on Display B.  Display 

B will show a “0101” or “ 1010”, to switch to the opposite setting press the B key once.  A “0” means 
zero Volts out and a “1” means 12 Volts out. In racing terms this is also referred to as “0” normally open, 
“1” normally closed.  (“0101” means off/on/off/on) 

 

 
 
 
 
 
 
 
 

Содержание 1014-SCR












Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды