LIVEMIX DA-816
9
OUTPUT ID FEATURE
The Output ID feature sends a test tone to the
selected DA-816 Output. This allows you to verify
that the desired external device is connected to the
selected output.
1. PRESS Output ID. The Output ID button will flash.
2. SELECT an Output. The slot will turn gray. The
corresponding LED on the front panel of the
DA-816 will flash and a test tone will be sent to
output. The Output ID feature can be used with
multiple outputs, that have been selected at the
same time.
3. PRESS Output ID again to exit this mode.
NOTE:
Observe the VU meters on the connected wireless transmitters or devices. The DA-816 plays
audible tone beeps in this mode to confirm the intended signal chain is setup properly.
The Output ID is a great way to:
• Quickly ensure musicians are given the correct wireless body packs and are assigned to the
correct personal mixer on stage.
• Test which device is connected to the DA-816 outputs.
• Verify proper connection from DA-816 to external devices.
