LIVEMIX CS-SOLO
24
CHANNEL HIGH PASS FILTER (HPF)
The High Pass Filter allows you to roll off some of the
low frequencies that can lead to muddy sounding
mixes. Most channels that do not contribute to the
low end of the mix, should have a HPF.
To access the High Pass Filter, PRESS HPF Settings
from the Channel EQ screen.
PRESS one of the five HPF frequency choices:
•
OFF:
HPF bypassed.
•
40Hz:
40Hz or lower will be filtered out. This
setting is good for most instruments.
•
80Hz:
80Hz or lower will be filtered out. This
setting will cut out some 60Hz hum and noise,
good for male vocals.
•
150Hz:
150Hz or lower will be filtered out. This
is another good setting for cutting hum. It is also
good for many stringed instruments.
•
250Hz:
250Hz or lower will be filtered out. This
is a good setting for higher pitched instruments
and female vocals.
NOTE:
The Channel EQ and HPF Settings share a page tab. When on the Channel EQ page, the HPF
Settings tab will be visible. When on the HPF Settings page, the Channel EQ tab will be visible.
