DVM-100 & DVM-400 Installation Guide
860-00187-00 REV A
Copyright © 2013 Digital Ally, Inc.
3-4
Secure your DVM to the vehicle windshield. For 2011 or 2012 Dodge, attach and orientate the
adapter to factory windshield as shown. Use Loctite™ to secure the adapter to the factory
windshield mounts. Attach drop down bracket as shown.
In some vehicles, the factory position of the manufacturer’s windshield mounting plate may not allow for
proper rearview DVM adjustment. The mounting plate included with the DVM package can be glued to
the windshield in a location that will allow proper adjustment. We recommend Loctite 03346 for
installation of the mounting plate. DO NOT glue mounting plates to the black coated portion of the glass.
For added RFI protection, attach the DVM shielding strap to the mirror. The DVM shielding strap
should be securely attached to the vehicle chassis (metal structure) above the windshield.
The shielding strap must be connected to a metal surface of the vehicle chassis to prevent
interference. Failure to properly connect the shielding strap may cause operation issues.
•
Route cabling along the roofline and down the A-pillar
Leave enough slack in the 3 cables as a service loop for the rearview mirror adjustment.
Then you can begin routing the cables under the front edge of the headliner towards the
passenger side of the vehicle. Continue routing the cables down the windshield pillar
below the dash. Secure the cables together with tie wraps. To conceal the cable it may
be necessary to loosen the sun visor mounting bracket and/or other trim pieces to allow
the cable to be tucked in behind the headliner.
Optional Big Ball Mount
