9
For External Power and low amp setting, the jumpers are set as
follows:
•
Two Horizontal Jumpers on columns 2 and 3 indicate External
power is supplied
•
One Vertical jumper on column 4 indicates Low Amplifier setting
Network
Connect the RJ-45 connector with a CAT5/5E cable to an available
10/100 Ethernet port on a network switch.
LED Indicators
Ready - Indicates Server connection state
Link - Indicates network connection
Active - Indicates audio activity
Description
Ready
Link
Active
Unit is connected to the Server
Solid
Solid
Off
Unit is playing audio from the Server
Solid
Solid
Flashing
Unit is trying to connect to the
Server
Slow Flash
Solid
Off
Unit does not have a valid network
connection
Any
Off
Any
Unit has been discovered by the
Intercom Configuration Tool
Fast Flash
On
Unit has not been configured to
connect to a Server
Slow Flash
On
On
Volume Controls
The ESS has seven volume level settings. Pressing the “Vol +” or the
“Vol -“ seven times sets the unit to its maximum or minimum volume.
To control the volume through software, refer to the documentation
included with the software product.
Содержание ii3-ESS
Страница 1: ...ii3 ESS IP Speaker System Users Guide ...
Страница 2: ...ESS User Manual 2 This page intentionally left blank ...
Страница 14: ...11 Physical Dimensions 4 9 3 4 2 8 1 5 4 0 ...
Страница 17: ...Notes ...