CFM Conference Mixer Product Manual
3
Copyright © 2009 Digispider. All rights reserved.
www.digispider.net
z
Pull out the cable from the network adapter which is on the back of CFM
equipment first and then pull out the cable from the network hole, in order
to avoid short circuit when you sever the connection. Plug the cable into
network hole first and then plug the cable into network adapter when you
reconnect the products.
z
Please use surge protective device, circuitry adjuster and UPS, in order to
avoid instantaneous high or low voltage damage to CFM equipment.
z
Make sure there are no goods exert pressure on cables. Do not make cables
exposure, which will cause trample and stumble.
z
Never push objects of any kind through openings of CFM equipment as that
may cause interior short circuit and result in fire, electric shock, or other
hazards.
z
Do not use CFM equipment near a source of heat and don’t jam the
refrigeration vent. Don’t make paper underlie CFM equipment. Use CFM
equipment in ventilated area and don’t locate CFM equipment on bed, sofa
or carpet.
z
Never spill food or liquid of any kind on the CFM equipment.
z
Do not use the CFM near water or other liquids, or in rainy/moist situations.
If liquid gets into your CFM, turn it off and take it to your dealer for
inspection.
z
Water and/or Moisture Do not use this equipment near water or in contact
with water.
Technical instructions
Warning:
Perhaps there are some mistakes of description and
printing in technical instructions
z
With the rapid technical development, our products keep on improving
and renewing, so there are may some demoded or useless
specifications about some standards in this manual.
z
We are very conscientious for reorganizing this manual, but we do not
guarantee there is no negligence or mistake in this manual, and we
can't exclude the possibility that this manual will be renewed again. If
there are any revises, we will not give notice any more.
z
If there is any revises in this manual, it will be promulgated in Digispider
Website: