DG-WU2008 User Manual
16
4.2.b Route Rule
4.2.b.1 Multi-line Deversion Rules
You can use this option if multiple WAN is terminating on controller. You can set session shunt,
source IP shunt and source IP +destination IP for some specific network traffic depending on
desired WAN connection to minimize the internet utilization.
You need to create Source IP, Destination IP object under
“Object Management”
tab &
map the defined object traffic to selected WAN interface.
Session Shunt:
It will divide the user’s internet bandwidth as per the number of WAN terminated on
controller by using this option.
Destination address shunt
You can bind the source/ destination IP address to specific WAN interface to constraint
the bandwidth congestion by using this option.
Source IP Shunt Line Selection:
You can route the user traffic through specific WAN interface by using this option.
