DG-WA1102NP User Manual
15
IP Subnet Mask: 255.255.255.0
8. Click OK to complete the IP parameters setting.
For OS of Microsoft Windows Vista / 7:
1. Click the Start button and select Settings, then click Control Panel. The Control
Panel window will appear.
2. Move mouse and double-click the right button on Network Connections item. The
Network Connections window will appear. Double click Local Area Connection icon,
then User Account Control window shown. Right click Continue button to set
properties.
3. In Local Area Connection Properties window, choose Networking tab, move mouse
and click Internet Protocol Version 4 (TCP/IPv4), then click Properties button.
4. Move mouse and click General tab, select Specify an IP address and type in values
as following example.
IP Address: 192.168.1.1, any IP address within 192.168.1.1 to 192.168.1.254 is
good to connect the Wireless LAN Access Point. Do not use 192.168.1.200
IP Subnet Mask: 255.255.255.0
5. Click OK to complete the IP parameters setting.
Содержание DG-WA1102NP
