Digisol DG-WA1102NP, Руководство пользователя

Страница: 14 / 88

DG-WA1102NP User Manual
14
3. Software Configuration
There are web based management and configuration functions allowing you to have
the jobs done easily.
The Outdoor AP is delivered with the following factory default parameters on the
Ethernet LAN interfaces.
Default IP Address: 192.168.1.200
Default IP subnet mask: 255.255.255.0
WEB login User Name: admin
WEB login Password: admin
Telnet login User Name: admin
Telnet login Password: admin
3-1 Prepare your PC to configure the WLAN Broadband Router
For OS of Microsoft Windows 2000/ XP:
1. Click the Start button and select Settings, then click Control Panel. The Control
Panel window will appear.
2. Move the mouse and double-click the right button on Network and Dial-up
Connections icon. Move mouse and double-click the Local Area Connection icon.
The Local Area Connection window will appear. Click Properties button in the Local
Area Connection window.
3. Check the installed list of Network Components. If TCP/IP is not installed, click
the Add button to install it; otherwise go to
step 6 .
4. Select Protocol in the Network Component Type dialog box and click Add button.
5. Select TCP/IP in Microsoft of Select Network Protocol dialog box then click OK
button to install the TCP/IP protocol, it may need the Microsoft Windows CD to
complete the installation. Close and go back to Network dialog box after the TCP/IP
installation.
6. Select TCP/IP and click the properties button on the Network dialog box.
7. Select Specify an IP address and enter the values as shown in following example.
 IP Address: 192.168.1.1, any IP address within 192.168.1.1 to 192.168.1.254 is
good to connect the Wireless LAN Access Point. Don’t use 192.168.1.200