Digisol DG-GS4826S, Руководство по управлению

Страница: 636 / 1344

C
HAPTER
23 | Using the Command Line Interface
CLI Command Groups
– 636 –
CLI C
OMMAND
G
ROUPS
The system commands can be broken down into the functional groups
shown below
.
Table 37: Command Group Index
Command Group Description Page
General Basic commands for entering privileged access mode,
restarting the system, or quitting the CLI
639
System Management Display and setting of system information, basic modes
of operation, maximum frame size, file management,
console port and telnet settings, system logs, SMTP
alerts, and the system clock
647
Simple Network
Management Protocol
Activates authentication failure traps; configures
community access strings, and trap receivers
693
Remote Monitoring Supports statistics, history, alarm and event groups 713
Flow Sampling Samples traffic flows, and forwards data to designated
collector
721
User Authentication Configures user names and passwords, logon access
using local or remote authentication, management
access through the web server, Telnet server and Secure
Shell; as well as port security, IEEE 802.1X port access
control, and restricted access based on specified IP
addresses
727
General Security
Measures
Segregates traffic for clients attached to common data
ports; and prevents unauthorized access by configuring
valid static or dynamic addresses, web authentication,
MAC address authentication, filtering DHCP requests and
replies, and discarding invalid ARP responses
777
Access Control List Provides filtering for IPv4 frames (based on address,
protocol, TCP/UDP port number or TCP control code),
IPv6 frames (based on address, DSCP traffic class, next
header, or flow label), or non-IP frames (based on MAC
address or Ethernet type)
823
Interface Configures the connection parameters for all Ethernet
ports, aggregated links, and VLANs
845
Link Aggregation Statically groups multiple ports into a single logical trunk;
configures Link Aggregation Control Protocol for port
trunks
863
Mirror Port Mirrors data to another port for analysis without affecting
the data passing through or the performance of the
monitored port
873
Rate Limit Controls the maximum rate for traffic transmitted or
received on a port
877
Automatic Traffic Control Configures bounding thresholds for broadcast and
multicast storms which can be used to trigger configured
rate limits or to shut down a port
879
Address Table Configures the address table for filtering specified
addresses, displays current entries, clears the table, or
sets the aging time
893
Spanning Tree Configures Spanning Tree settings for the switch 899
VLANs Configures VLAN settings, and defines port membership
for VLAN groups; also enables or configures private
VLANs, protocol VLANs, voice VLANs, and QinQ tunneling
925