Digisol DG-GS1510PL, Руководство пользователя

Страница: 56 / 60

DG-GS1510PL User Manua l
Page 55
Figure 58 NDP configuration page
(2) NTDP configuration page
Figure 59 shows the NTDP configuration page. Using this page to configure NTDP. The information that
can be set includes: selecting the port, enabling the NTDP function of the port, enabling the global NTDP
function, the range of the topology collection, the time interval of collecting the regular topology, the delay time
of the first port forwarding the packet, and the forwarding of the packet by other ports. delay.
For port selection, you can select the port as required and enable the NTDP function on the port. For NTDP
to operate normally, both global and port NTDP must be enabled.
The range of topology collection is configured. The valid range is 1-6. In the default configuration, the
maximum number of hops from the most distant device to the topology collection device is 3.
Set the interval for collecting the topology collection. The valid range is 0-65535 minutes. The default
configuration is 1 minute.
Set the delay for forwarding packets on the first port. The valid range is 1-1000 milliseconds. The default
value is 200 milliseconds.
Sets the delay for forwarding packets on the first port. The valid range is 1 to 100 milliseconds. The default
value is 20 milliseconds.