Digisol DG-CD2030HD, Быстрое руководство по установке

Страница: 13 / 14

13
Following are the solutions to problems that may occur during the installation
and operation of the Digisol DG-CD2030HD.
1) The DVR cannot boot up normally.

The power supply is not correct.

Switch power supply line is not in good connection/damaged.

The program updation is wrong.

The hard disk is damaged or the hard disk lines are broken.

The front panel is damaged.

The main board of the DVR is damaged.
2) The DVR reboots automatically or stops working after boot up.

The input voltage is not stable or too low.
 The hard disk is damaged or the hard disk lines are broken.

The power of the switch power supply is low.

Video signal is not stable.

Bad heat radiator or too much dust or bad running circumstance
for the DVR.

The hardware of the DVR is damaged.
3) System cannot detect the hard disk.

The hard disk power supply line is not connected.

The cables of the hard disk are damaged.

The hard disk is damaged.

The SATA port of main board is damaged.
This product comes with One Year warranty. For further details
about warranty policy and Product Registration, please visit
support section of
www.digisol.com