DVR User Manual
22
Special functions
：
1. Preset
Click on ‘Set’ to set a location for the preset, calls the preset points, PTZ automatically turns to
the setting position.
1
）
Preset option
Set a location for the preset, procedure is as follows:
Step1: In Picture 3.13, click the Direction button will turn into preset position, click the Settings
button to enter PTZ Config, please refer “
Picture 3.14
”.
Step 2: Click the Preset button, then write the preset points in the input blank.
Step 3: Click Settings button, and return to Picture 3.10 Complete setup, that is the preset points and
preset position corresponds.
Clear Preset
：
Input preset points, click Remove button, remove the preset.
Picture 3.14 PTZ Config
2
）
Preset Point Calls
In Picture 3.10, click Page Switch button, enter PTZ control interface as shown in the Picture
3.12. In the input blank, write the preset points, then click Preset button, PTZ turn to the
corresponding preset point.
Preset button
Preset point input blank
