DG-BR4000N/E User Manual
93
Click Add and the following figure appears:
The following table describes parameters of adding a routing rule:
Item
Description
Active
Enable it to apply the routing rule.
Router Name
Enter the name of the static route.
Destination IP
Address
Enter the destination IP address or network that you want to access.
IP Subnet
Mask
Subnet mask of the destination IP address.
Gateway IP
Address
IP address of the router or host to which packets are sent.
Metric
Indicates the number of hops in the user network. Its value range is 2 to
15. Usually, the value of 2 or 3 leads to the best performance. If the
route is direct connection, set the Metric to 2.
After the settings are done, click Apply to save the settings.
