DigiPoS PowerPoS Technical Manual
Windows 95 & NT
The USB Support in Windows 95 (even OSR2) has never been ‘outstanding’ and we
therefore advise that this function is disabled if you are not using USB devices.
Advanced Chipset Features
OnChip USB
Enabled
Disabled
Select
Enabled only
if you have USB peripherals such as a
keyboard or mouse.
USB Keyboard Support
Enabled
Disabled
Enables the use of a USB Keyboard
(Standard functions only)
PnP/PCI Configurations
Assign IRQ For USB
Disabled
Enabled
If the USB ports are not being used, this function allows
you to release the IRQ that was being used for the USB
root hub.
Power Management
Please note that the Power Management settings should be left in their default state and
not activated under Windows NT as it is not supported and may cause system instability.
Windows 98, Me, 2000 & Xp
Please note that the Power Management settings should be left in their default state and
not activated
One reason is that Customers have stated that they do not want the system going into
standby as the system could be used at any moment and they do not want to wait while
the system recovers from either a doze or standby mode.
Windows Xp Special Notes
When installing Windows Xp from scratch, you must disable COM 3 & 4 in the Integrated
Peripherals section of the BIOS (First taking note of the settings) before installation has
commenced. Once the installation is complete, these ports can be re-activated. This is an
issue between the VIA chipset and Windows XP’s plug and play hardware detection
routine.
Page 68 of 82
Содержание PowerPoS
Страница 1: ...DigiPoS PowerPoS Technical Manual Socket 370 Series Manual Version 1 4 June 2004 ...
Страница 29: ...DigiPoS PowerPoS Technical Manual Motherboard Orientation JP1 J7 SW1 Component Side Page 29 of 82 ...
Страница 30: ...DigiPoS PowerPoS Technical Manual Pin1 HDD Connector COM 2 COM 1 Underside Page 30 of 82 ...
Страница 80: ...DigiPoS PowerPoS Technical Manual Notes Signed Print Page 80 of 82 ...