3
H.264 Indoor/Outdoor Dome IP Camera
SECTION 2: INSTALLATION AND SETUP
SECTION 2
Installation and Setup
2.1 What’s in the box
Your dome camera includes the following:
•
BLK-IPD104 camera
•
DC power adapter with power plugs for different powering sources
•
Base seal (surface cushion)
•
Power extension cable
•
11-pin terminal block
•
Hardware installation kit with a hex wrench, 3 screws and wall inserts
•
CD with application software, software manual, and camera documentation
2.2 Tools you need
To install the camera, you will need:
•
Phillips #2 screwdriver
•
PC with Microsoft
®
Windows
®
XP SP3 or newer
Depending on how the camera is mounted, you may also need:
•
Hammer
•
Drill with bits for drilling mounting holes
•
1-3/8” hole saw
2.3 Mount the camera
1.
Determine where the camera will be mounted and record the Media Access Control (MAC) address of the camera. The MAC
address can be found on the label on the base of the camera. Record the information in the following table.
Location:
MAC address:
2.
Separate the camera dome from the camera base housing by loosening the three captive screws with the hex wrench
provided.
