14
www.digiop.com
SECTION 2: INSTALLATION AND SETUP
b.
Type
cmd
in the entry field, then click
OK
to open the DOS command window.
c.
At the command prompt, enter
ipconfig.
The response will show the your PC’s network settings.
Example: Typical use of
ipconfig
in Windows XP
d.
Enter the IP Address, Subnet Mask, and Default Gateway for your PC’s Ethernet adapter into Table 1.
NOTE
The Ethernet adapter data you see by using ipconfig will probably be different from that shown in the example
above. If you are using Windows Vista or Windows 7, the IP address is identified as the “IPv4 Address.”
Table 1. PC/Camera network settings
Computer (PC)
Camera
IP Address
Subnet Mask
Default Gateway
CAUTION
If connecting your camera to an enterprise network, consult with your network administrator for the
camera IP address, subnet mask, and default gateway.
