DIGINET ENERGY MANAGEMENT
Recessed Flush Mount 360
o
PIR Presence Sensor
Diginet Control Systems Pty Ltd
Page
4
of
16
1.
Product Item
This guide provides installation and configuration information for the Diginet recessed flush mount 360 degree
passive infrared (PIR) presence sensor with one and two channel 16A control modules.
Table 1
- DGEMSR360Px part numbers and components
Package Version
Sensor Head
Control Module
DGEMSR360P1
ILSM02-D 360
o
PIR Sensor
ILSCM01-D, 1 Channel 16A (screw terminals)
DGEMSR360P2
ILSM02-D 360
o
PIR Sensor
ILSCM02-D, 2 Channel 16A (screw terminals)
2.
Important Notes and Safety Information
WARNING
– Electric shock may result in serious injury or death. Follow all warnings in this guide and on the
product while working in accordance with the latest electrical safety practices.
The installer must be suitably qualified and should work in accordance with standard safety procedures
for mains-powered electrical equipment.
There are no user serviceable parts inside the sensor head or control module. Do not attempt to
disassemble or operate the presence sensor with any covers removed.
The presence sensor is intended for indoor use only.
Consult the manufacturer’s instructions for loads connected to the control module output terminals.
If you require information or assistance regarding the installation, configuration, or operation of the presence
sensor, contact Technical Services at Diginet Control Systems. Contact details are on the back cover of this guide
and at
3.
Product Summary
The presence sensor package consists of two items: a small 360 degree passive infrared (PIR) sensor head and a
control/relay module.
The sensor head is recessed into ceilings and has a low profile trim and opaque dome lens for sensing movement
across short and long range plus ambient light level. Adjustment sliders for time and light level are discreetly
hidden in the patented sensor head which pops out providing configuration after installation without any tools.
One and two channel control modules for switching loads are slim line and easily fit into the ceiling space through
the sensor head aperture.
4.
Product Capabilities
Designed for both minor and major movement, the sensor head has 864 fields of view (FOV) ensuring reliable
operation up to 7m diameter in different applications (e.g. office or corridor installations). Time delay range is 5
min to 25 min plus a walk test setting of 5 seconds.
Control modules are rated at 16A for switching inductive/capacitive loads with volt free relays. The 2 channel
model provides a run-on feature whereby Relay 2 will switch off 5 minutes after the time delay expires.
Both control modules have a switch input that allows for manual override off control of the Relay 1 output.
