Digimerge DPV14W, Инструкция по эксплуатации

Страница: 9 / 12

CAMERA ADJUSTMENT
<SETTINGS>
Setting can be made using the 5 buttons located on the back of the camera.
<CAMERA SETUP>
1) PRESETS
1) The CAMERA SETUP is displayed on the monitor when press and hold
the ENTER button for more than 1 second.
2) Press the UP and DOWN buttons in the vertical direction and move the cursor(>)
to the desired submenu.
3) ".." indicated submenus.
- NORMAL
- WD NORMAL Standard video with Wide Dynamic Range Limit Max
- INDOOR To brighten the video taken indoors
Standard video
Auto Gain Control selected (LOW / NORMAL / HIGH)
2 ) AGC
- DEFAULT
Standard video
- INDOOR
To brighten the video taken indoors
- OUTDOOR
3) WHITE BALANCE
hite balance is automatically followed up
- A T W Normal
W
(Limits the range of auto tracking by the value of two properties).
When shooting in a bright area outdoors
W - ATW Xtnd hite balance is automatically followed up.
- AWB One-push automatic white balance control.
Shoot a target white subject and press the ENTER button,
and the white balance will be adjusted.
4) SYNC
- OUTDOOR When shooting in a bright area outdoors
- INTERNAL
This mode is necessary for using the internal synchronization.
- LINELOCK
This mode is necessary for the operation of multi camera because
it synchronizes the camera phase by using the external signal
(AC Signal).
5
) D/N CONTROL
- AUTO
T
his camera has a function which automatically changes to
the appropriate mode for daytime or night-time.
- OFF
I
n this mode, the camera outputs the video image only in color.
- 5 -