31
Display Menu
SEQUENCE
Sets the Sequence Mode for the display of
available channels. The Sequence Settings
for camera views can only be changed using
the Mouse or Remote Control.
•
Activation
- Turns the Sequence ON/
OFF.
NOTE
: Up to 16 different Sequence Mode
settings can be configured, however only
ONE can be active at a time.
•
List
- Displays the Sequence Title
•
ADD Button
- Select the ADD button to
create a New Sequence:
z
Sequence Title
- Enter a title for the
New Sequence
z
Activation
- Turn the Sequence ON/
OFF (only one sequence can be active at a
time).
z
CANCEL Button
- Cancels the addition
of the New Sequence.
z
SAVE Button
- Saves the New
Sequence, and moves to the New Sequence
Configuration screen:
MONITOR
•
Sequence Dwell
- Sets the cycle time
when the system is in Sequence Mode
(between 1~60 seconds).
•
Spot-Out Dwell
-The length of time to
display a camera in Spot-out mode.
•
De-Interlace Mode
- Removes the
screen spread when set to ON.
•
Alarm Pop-Up Mode
- Set to ON/OFF.
Switches the screen display to the
detected channel when an Alarm is
activated.
•
Alarm Pop-Up Dwell
- Determines the
length of time that a channel is displayed
when an Alarm is detected (between
1~60 seconds).
•
Motion Pop-Up Mode
- Set to ON/OFF.
Switches the screen display to any
channel when Motion is detected.
•
Motion Pop-Up Dwell
- Determines the
length of time that a channel is displayed
when Motion is detected (between 1~60
seconds).
•
Aspect Ratio
- Sets the Aspect Ratio for
the display to 4:3 (Letterbox) or 16:9
(Full Screen)
4:3 Ratio
16:9 Ratio
