For door thickness measuring between .850” - 2.368” (21.6mm - 60.1mm)
Required Components
u
Do not use an electric screw gun unless it is equipped with a torque adjuster and is set to low.
1* - Phillips Head Screwdriver (#2)
1* - Pin Extender
2 - Phillips Head Screws
2 - Split Lock Washers
1 - Front Unit
Standard Body Keypad
Vertical Body Keypad
Standard Body RFID
Vertical Body RFID
Horizontal Body Keypad
Solenoid Spring Bolt
Solenoid Spring Latch
Motorized Dead Bolt
Motorized Dead Latch
1 - Rear Unit
*Two (2) pin extenders are required for door thickness
measuring between 1.570”-2.368” (39.9-60.1mm)
13
*Not included
