Focus 48
–
LED Lighting Profile
Installation Guide
Document Rev: 1.0 - 4 February 2022
Product specifications are subject to change without notice
digilin.com.au
©2022 Digilin Technologies
+617 3899 1267
Page 1 of 3
Notes
•
Install in a dry sheltered position
•
Profile is not sealed. Do not install where water or high humidity may be present
without further protection.
•
Installation should only be performed by a qualified professional
•
Install in accordance with all appropriate wiring standards
•
DALI is not SELV and needs to be wired accordingly
•
Never connect a LED fitting to a driver that is powered. Doing so may result in damage
to the LED.
•
Always make sure the output voltage range and output current of the LED driver match
the requirements of the LED fitting. Failure to do so may result in damage both the
driver and fitting.
•
The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent or a similar qualified person.
•
Do not install under mechanical stress.
•
Allow for expansion due to changes in temperature.
•
Please be aware that while the system has a very long operational life, faults may still occur, and provision needs to be made for maintenance.
•
Always turn off power before working on fitting.
•
Specifications
Units
Dimensions
48 x 32.5
mm
Length
Custom
Weight
1400
g/m
Wiring Diagram
